matrix-docker-ansible-deploy/docs/howto-server-delegation.md

Server Delegation

To have a server on a subdomain (e.g. matrix.<your-domain>) handle Matrix federation traffic for the base domain (<your-domain>), we need to instruct the Matrix network of such a delegation.

By default, this playbook guides you into setting up Server Delegation via a well-known file. However, that method may have some downsides that are not to your liking. Hence this guide about alternative ways to set up Server Delegation.

It is a complicated matter, so unless you are affected by the Downsides of well-known-based Server Delegation, we suggest you stay on the simple/default path.

Server Delegation via a well-known file

Serving a /.well-known/matrix/server file from the base domain is the most straightforward way to set up server delegation, but it suffers from the following problems:

As we already mention in Configuring DNS and Configuring Service Discovery via .well-known, this playbook already properly guides you into setting up such delegation by means of a /.well-known/matrix/server file served from the base domain (<your-domain>).

If this is okay with you, feel free to not read ahead.

Downsides of well-known-based Server Delegation

Server Delegation by means of a /.well-known/matrix/server file is the most straightforward, but suffers from the following downsides:

• you need to have a working HTTPS server for the base domain (<your-domain>)

• any downtime on the base domain (<your-domain>) or network trouble between the matrix subdomain (matrix.<your-domain>) and the base <domain> may cause Matrix Federation outages. As the Server-Server spec says:

Errors are recommended to be cached for up to an hour, and servers are encouraged to exponentially back off for repeated failures.

If this is not a concern for you, feel free to not read ahead.

Otherwise, you can decide to go against the default for this playbook, and instead set up Server Delegation via a DNS SRV record (advanced).

Server Delegation via a DNS SRV record (advanced)

NOTE: doing Server Delegation via a DNS SRV record is a more advanced way to do it and is not the default for this playbook.

As per the Server-Server spec, it's possible to do Server Delegation using only a SRV record (without a /.well-known/matrix/server file).

This prevents you from suffering the Downsides of well-known-based Server Delegation.

To use DNS SRV record validation, you need to:

• ensure that no /.well-known/matrix/server is served from the base domain, as that would interfere with DNS SRV record Server Delegation. To make the playbook not generate and serve the file, use the following configuration: matrix_well_known_matrix_server_enabled: false.

• ensure that you have a _matrix._tcp DNS SRV record for your base domain (<your-domain>) with a value of 10 0 8448 matrix.<your-domain>

• ensure that you are serving the Matrix Federation API (tcp/8448) with a certificate for <your-domain> (not matrix.<your-domain>!). See below.

Obtaining certificates

How you can obtain a valid certificate for <your-domain> on the matrix.<your-domain> server is up to you.

If <your-domain> and matrix.<your-domain> are hosted on the same machine, you can let the playbook obtain the certificate for you, by following our Obtaining SSL certificates for additional domains guide.

If <your-domain> and matrix.<your-domain> are not hosted on the same machine, you can copy over the certificate files manually. Don't forget that they may get renewed once in a while, so you may also have to transfer them periodically. How often you do that is up to you, as long as the certificate files don't expire.

Serving the Federation API with your certificates

Regardless of which method for obtaining certificates you've used, once you've managed to get certificates for your base domain onto the matrix.<your-domain> machine you can put them to use.

Based on your setup, you have different ways to go about it:

• Serving the Federation API with your certificates and matrix-nginx-proxy

• Serving the Federation API with your certificates and another webserver

• Serving the Federation API with your certificates and Synapse handling Federation

Serving the Federation API with your certificates and matrix-nginx-proxy

If you are using matrix-nginx-proxy, a reverse-proxy webserver used by default in this playbook, you only need to override the certificates used for the Matrix Federation API. You can do that using:

# Adjust paths below to point to your certificate.
#
# NOTE: these are in-container paths. `/matrix/ssl` on the host is mounted into the container
# at the same path (`/matrix/ssl`) by default, so if that's the path you need, it would be seamless.
matrix_nginx_proxy_proxy_matrix_federation_api_ssl_certificate: /matrix/ssl/config/live/<your-domain>/fullchain.pem
matrix_nginx_proxy_proxy_matrix_federation_api_ssl_certificate_key: /matrix/ssl/config/live/<your-domain>/privkey.pem

If your files are not in /matrix/ssl but in some other location, you would need to mount them into the container:

matrix_nginx_proxy_container_additional_volumes:
  - src: /some/path/on/the/host
    dst: /some/path/inside/the/container
    options: ro

You then refer to them (for matrix_nginx_proxy_proxy_matrix_federation_api_ssl_certificate and matrix_nginx_proxy_proxy_matrix_federation_api_ssl_certificate_key) by using /some/path/inside/the/container.

Make sure to reload matrix-nginx-proxy once in a while (systemctl reload matrix-nginx-proxy), so that newer certificates can kick in. Reloading doesn't cause any downtime.

Serving the Federation API with your certificates and another webserver

If you are NOT using matrix-nginx-proxy, but rather some other webserver, you can set up reverse-proxying for the tcp/8448 port by yourself. Make sure to use the proper certificates for <your-domain> (not for matrix.<your-domain>) when serving the tcp/8448 port.

Proxying needs to happen to 127.0.0.1:8048 (unencrypted Synapse federation listener).

Make sure to reload/restart your webserver once in a while, so that newer certificates can kick in.

Serving the Federation API with your certificates and Synapse handling Federation

Alternatively, if you are NOT using matrix-nginx-proxy and would rather not use your own webserver for Federation traffic, you can let Synapse handle Federation by itself.

To do that, make sure the certificate files are mounted into the Synapse container:

matrix_synapse_container_additional_volumes:
  - src: /some/path/on/the/host
    dst: /some/path/inside/the/container
    options: ro

You can then tell Synapse to serve Federation traffic over TLS on tcp/8448:

matrix_synapse_tls_federation_listener_enabled: true
matrix_synapse_tls_certificate_path: /some/path/inside/the/container/certificate.crt
matrix_synapse_tls_private_key_path: /some/path/inside/the/container/private.key

Make sure to reload Synapse once in a while (systemctl reload matrix-synapse), so that newer certificates can kick in. Reloading doesn't cause any downtime.