56 lines
2.4 KiB
Markdown
56 lines
2.4 KiB
Markdown
# Setting up Beeper Linkedin (optional)
|
|
|
|
The playbook can install and configure [beeper-linkedin](https://github.com/beeper/linkedin) for you, for bridging to [LinkedIn](https://www.linkedin.com/) Messaging. This bridge is based on the mautrix-python framework and can be configured in a similar way to the other mautrix bridges
|
|
|
|
See the project's [documentation](https://github.com/beeper/linkedin/blob/master/README.md) to learn what it does and why it might be useful to you.
|
|
|
|
```yaml
|
|
matrix_beeper_linkedin_enabled: true
|
|
```
|
|
|
|
There are some additional things you may wish to configure about the bridge before you continue.
|
|
|
|
Encryption support is off by default. If you would like to enable encryption, add the following to your `vars.yml` file:
|
|
```yaml
|
|
matrix_beeper_linkedin_configuration_extension_yaml: |
|
|
bridge:
|
|
encryption:
|
|
allow: true
|
|
default: true
|
|
```
|
|
|
|
If you would like to be able to administrate the bridge from your account it can be configured like this:
|
|
```yaml
|
|
matrix_beeper_linkedin_configuration_extension_yaml: |
|
|
bridge:
|
|
permissions:
|
|
'@YOUR_USERNAME:YOUR_DOMAIN': admin
|
|
```
|
|
|
|
You may wish to look at `roles/custom/matrix-bridge-beeper-linkedin/templates/config.yaml.j2` to find other things you would like to configure.
|
|
|
|
|
|
## Set up Double Puppeting
|
|
|
|
If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have to enable Shared Secred Auth.
|
|
|
|
The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
|
|
|
|
|
|
## Usage
|
|
|
|
You then need to start a chat with `@linkedinbot:YOUR_DOMAIN` (where `YOUR_DOMAIN` is your base domain, not the `matrix.` domain).
|
|
|
|
Send `login YOUR_LINKEDIN_EMAIL_ADDRESS` to the bridge bot to enable bridging for your LinkedIn account.
|
|
|
|
If you run into trouble, check the [Troubleshooting](#troubleshooting) section below.
|
|
|
|
After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting), if you haven't already done so.
|
|
|
|
|
|
## Troubleshooting
|
|
|
|
### Bridge asking for 2FA even if you don't have 2FA enabled
|
|
|
|
If you don't have 2FA enabled and are logging in from a strange IP for the first time, LinkedIn will send an email with a one-time code. You can use this code to authorize the bridge session. In my experience, once the IP is authorized, you will not be asked again.
|