You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

73 lines
1.9 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# IBM 5291 keyboard converter
[IBM 5291](https://deskthority.net/wiki/IBM_Model_F#IBM_5291_Keyboard)
A converter for the eponymous keyboard.
Keyboard Maintainer: [Listofoptions](https://github.com/listofoptions)
Hardware Supported: IBM 5291, Teensy 2.0
Make example for this keyboard (after setting up your build environment):
make converter/ibm_5291:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
The pinout is as follows:
IBM5291Cable to Pinhead14
| pin | description
----|------------------------
1 | GND
2 | NC
3 | GND
4 | GN)
5 | +5V
6 | D0
7 | D1
8 | D2
9 | D3
10| D4
11| D5
12| D6
13| Strobe
14| Out
The pins on this connector are organized
![here](https://geekhack.org/index.php?action=dlattach;topic=48950.0;attach=36759;image)
IBM52912 Cable with DB15M connector
| pin | description
----|-------------
|1,2,3 | GND
|4 | +5V
|5 | D0
|6 | D1
|7 | D2
|8 | D3
|9 | D4
|10 | D5
|11 | D6
|12 | Strobe
|13 | Out
|14 | PE
|15 | NC
The above connector is actually numbered so it should be easier to determine
where the needed connections are.
To connect to the teensy, the following are pins are needed (if you should choose not set your own):
* PB0 -> PB6 are connected to D0 -> D6
* +5V is connected to the corresponding teensy pin
* gnd is as well, only one of the gnd pins needs to be connected though.
* strobe is connected to pin PD1
* data is connected to PD0
* PE does not need to be connected to anything, but it could also be connected to gnd
sources:
http://www.retrocomputing.eu/documents/5291_MaintenanceLibrary.pdf