diff --git a/README.md b/README.md
index 47119d14d..edda6f995 100644
--- a/README.md
+++ b/README.md
@@ -57,6 +57,8 @@ Using this playbook, you can get the following services configured on your serve
 
 - (optional) the [mautrix-signal](https://github.com/mautrix/signal) bridge for bridging your Matrix server to [Signal](https://www.signal.org/)
 
+- (optional) the [beeper-linkedin](https://gitlab.com/beeper/linkedin) bridge for bridging your Matrix server to [LinkedIn](https://www.linkedin.com/)
+
 - (optional) the [matrix-appservice-irc](https://github.com/matrix-org/matrix-appservice-irc) bridge for bridging your Matrix server to [IRC](https://wikipedia.org/wiki/Internet_Relay_Chat)
 
 - (optional) the [matrix-appservice-discord](https://github.com/Half-Shot/matrix-appservice-discord) bridge for bridging your Matrix server to [Discord](https://discordapp.com/)
diff --git a/docs/configuring-playbook-bridge-beeper-linkedin.md b/docs/configuring-playbook-bridge-beeper-linkedin.md
new file mode 100644
index 000000000..390794290
--- /dev/null
+++ b/docs/configuring-playbook-bridge-beeper-linkedin.md
@@ -0,0 +1,59 @@
+# Setting up Beeper Linkedin (optional)
+
+The playbook can install and configure [beeper-linkedin](https://gitlab.com/beeper/linkedin) for you. This bridge is based on the mautrix-python framework and can be configured in a similar way to the other mautrix bridges
+
+See the project's [documentation](https://gitlab.com/beeper/linkedin/-/blob/master/README.md) to learn what it does and why it might be useful to you.
+
+```yaml
+matrix_beeper_linkedin_enabled: true
+```
+
+There are some additional things you may wish to configure about the bridge before you continue.
+
+Encryption support is off by default. If you would like to enable encryption, add the following to your `vars.yml` file:
+```yaml
+matrix_beeper_linkedin_configuration_extension_yaml: |
+  bridge:
+    encryption:
+      allow: true
+      default: true
+```
+
+If you would like to be able to administrate the bridge from your account it can be configured like this:
+```yaml
+matrix_beeper_linkedin_configuration_extension_yaml: |
+  bridge:
+    permissions:
+      '@YOUR_USERNAME:YOUR_DOMAIN': admin
+```
+
+You may wish to look at `roles/matrix-bridge-beeper-linkedin/templates/config.yaml.j2` to find other things you would like to configure.
+
+
+## Set up Double Puppeting
+
+If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
+
+### Method 1: automatically, by enabling Shared Secret Auth
+
+The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
+
+This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
+
+
+## Usage
+
+You then need to start a chat with `@linkedinbot:YOUR_DOMAIN` (where `YOUR_DOMAIN` is your base domain, not the `matrix.` domain).
+
+Send `login YOUR_LINKEDIN_EMAIL_ADDRESS` to the bridge bot to enable bridging for your LinkedIn account. 
+
+If you run into trouble, check the [Troubleshooting](#troubleshooting) section below.
+
+After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting), if you haven't already done so.
+
+
+## Troubleshooting
+
+### Bridge asking for 2FA even if you don't have 2FA enabled
+
+If you don't have 2FA enabled and are logging in from a strange IP for the first time, LinkedIn will send an email with a one-time code. You can use this code to authorize the bridge session. In my experience, once the IP is authorized, you will not be asked again. 
diff --git a/docs/configuring-playbook.md b/docs/configuring-playbook.md
index fae66dca2..60c7a4bf2 100644
--- a/docs/configuring-playbook.md
+++ b/docs/configuring-playbook.md
@@ -104,6 +104,8 @@ When you're done with all the configuration you'd like to do, continue with [Ins
 
 - [Setting up Appservice IRC bridging](configuring-playbook-bridge-appservice-irc.md) (optional)
 
+- [Setting up Beeper LinkedIn bridging](configuring-playbook-bridge-beeper-linkedin.md) (optional)
+
 - [Setting up Appservice Discord bridging](configuring-playbook-bridge-appservice-discord.md) (optional)
 
 - [Setting up Appservice Slack bridging](configuring-playbook-bridge-appservice-slack.md) (optional)