jlj-qmk/converter/ibm4704_usb
2014-02-09 08:25:23 +09:00
..
config.h Add Initial files of 4704_usb 2014-02-09 02:42:17 +09:00
keymap_common.c Add Initial files of 4704_usb 2014-02-09 02:42:17 +09:00
keymap_common.h Add Initial files of 4704_usb 2014-02-09 02:42:17 +09:00
keymap_plain.c Add Initial files of 4704_usb 2014-02-09 02:42:17 +09:00
led.c Add Initial files of 4704_usb 2014-02-09 02:42:17 +09:00
Makefile Add Initial files of 4704_usb 2014-02-09 02:42:17 +09:00
matrix.c Tweak keyboard initialize 2014-02-09 08:25:23 +09:00
README.md Add Initial files of 4704_usb 2014-02-09 02:42:17 +09:00

IBM 4704 to USB keyboard converter =======----======================= This firmware converts IBM 4704 keyboard protocol to USB HID.

Connect Wires

In case of Teensy2.0(ATMega32U4):

  1. Connect Vcc and GND.
  2. Connect Clock and Data line.
    • Clock is on PD1 and Data on PD2.
  3. Optionally you need pull-up register. 1KOhm is OK?

To change pin configuration edit config.h.

Build Firmware

Just run make:

$ make

To select keymap:

$ make KEYMAP=[plain|...]

Keymap

Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named keymap_<name>.c and see keymap document(you can find in top README.md) and existent keymap files.