History

Michael Graf ad91454574 Adaptive debounce logic The debounce filtering reports a key/switch change directly, without any extra delay. After that the debounce logic will filter all further changes, until the key/switch reports the same state for the given count of scans. So a perfect switch will get a short debounce period and a bad key will get a much longer debounce period. The result is an adaptive debouncing period for each switch. This value defines how often the same key/switch state has to be detected in successive reads until the next key state can be reported. In other words this value defines the minimum debouncing period for a switch.		2018-11-20 15:55:35 +01:00
..
keymaps
util
190hotfix.sh
config.h	Adaptive debounce logic	2018-11-20 15:55:35 +01:00
ergodox_ez.c
ergodox_ez.h
i2cmaster.h
info.json
matrix.c	Adaptive debounce logic	2018-11-20 15:55:35 +01:00
readme.md
rules.mk
twimaster.c

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default
This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex
Start the teensy loader.
Load the .hex file into it.
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

Build the firmware with make keymapname, for example make default
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.