jlj-qmk/keyboards/handwired/jopr/rules.mk
joelproko 2d15961855 [Keyboard] added custom keyboard (#6141)
* added keyboard_layout_jopr

* making it compile

* #pragma once instead of #ifndef and #define

* renamed and added keymap

renamed old "default" to "modded_white", added new "default" that resembles an ISO 105-key layout

* reordered keyboards/jopr/info.json to match order o layout array

* implemented most suggestions

* fixed missing ;

* fixed bootloader setting for rules.mk

* adopted standard layout matrix naming convention

* "fixed" commented-out code in keymaps

* changes to keymap layers and LEDs

Turns out adding a layer for ROYA-modified keycodes is more trouble than it's worth and works better by just defining a ROYA key.
Also, LEDs were set up incorrectly.
Lastly, implemented SysReq-Warning LED.

* moved forced NumLock code

just in case either it or the CapsLock & ScrlLock update code wouldn't both work otherwise

* rearranged media keycodes

* replaced Shifted keycodes with basic ones

* Apply suggestions from code review

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* implemented suggestions by noroadsleft

* Apply suggestions from code review

Make ISO-Enter QMK Configurator-friendly

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update readme.md

* Update keyboards/jopr/info.json

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* moved keyboard to handwired folder

It was said that personal passion projects belong in there, even if they're not actually handwired

* Update readme.md
2019-06-18 11:34:36 -07:00

64 lines
2.4 KiB
Makefile

# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no
UNICODE_ENABLE = yes
RGBLIGHT_ENABLE = no