History

Drashna Jaelre 6cf574396a [Keyboard] Update default keymaps to use `layer_state_t` (#7444 ) * Update default keymaps to use `layer_state_t` * Convert binon32 as get_highest_layer in default keymaps		2019-11-21 22:40:29 -08:00
..
keymaps	[Keyboard] Update default keymaps to use `layer_state_t` (#7444 )	2019-11-21 22:40:29 -08:00
util
190hotfix.sh
config.h
ergodox_ez.c
ergodox_ez.h
info.json
led_i2c.c
matrix.c
post_config.h
readme.md
rules.mk

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default
This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex
Start the teensy loader.
Load the .hex file into it.
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

Build the firmware with make keymapname, for example make default
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.