jowj/jlj-qmk
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
01f91bf6f4
jlj-qmk/keyboards/jj40
History
ajp10304 01f91bf6f4 JJ40 AJP10304 layout (#2407) 
* JJ40 AJP10304 layout
Updated AJP10304 readme.md with formatting

* Revert default JJ40 keymap
2018-02-23 13:21:56 -05:00
..
keymaps JJ40 AJP10304 layout (#2407) 2018-02-23 13:21:56 -05:00
tools
backlight_custom.h Backlighting for JJ40 and underglow initialisation code (#2260) 2018-01-18 16:02:32 -05:00
backlight.c Backlighting for JJ40 and underglow initialisation code (#2260) 2018-01-18 16:02:32 -05:00
breathing_custom.h Backlighting for JJ40 and underglow initialisation code (#2260) 2018-01-18 16:02:32 -05:00
config.h Backlighting for JJ40 and underglow initialisation code (#2260) 2018-01-18 16:02:32 -05:00
i2c.c
i2c.h
jj40.c Update personal layouts, free up matrix_scan_user for JJ40 (#2319) 2018-02-02 01:30:47 -05:00
jj40.h Backlighting for JJ40 and underglow initialisation code (#2260) 2018-01-18 16:02:32 -05:00
matrix.c Update personal layouts, free up matrix_scan_user for JJ40 (#2319) 2018-02-02 01:30:47 -05:00
README.md
rules.mk Update personal layouts, free up matrix_scan_user for JJ40 (#2319) 2018-02-02 01:30:47 -05:00
usbconfig.h Backlighting for JJ40 and underglow initialisation code (#2260) 2018-01-18 16:02:32 -05:00

README.md

jj40

jj40

A compact 40% (12x4) ortholinear keyboard kit made and KPRepublic on AliExpress.

Keyboard Maintainer: QMK Community
Hardware Supported: Atmega32A
Hardware Availability: AliExpress

Make example for this keyboard (after setting up your build environment):

make jj40:default:program

See build environment setup then the make instructions for more information.

Note that this is a complete replacement for the firmware, so you won't be using Bootmapper Client to change any keyboard settings, since not all the USB report options are supported.

In addition you may need the AVR toolchain and bootloadHID for flashing:

$ brew cask install crosspack-avr
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

In order to use the ./program script, which can reboot the board into the bootloader, you'll need Python 2 with PyUSB installed:

$ pip install pyusb

If you prefer, you can just build it and flash the firmware directly with bootloadHID if you boot the board while holding down Backspace (Top Right Key) to keep it in the bootloader:

$ make jj40
$ bootloadHID -r jj40_default.hex

Troubleshooting

  1. Try plugging the board in while pressing Backspace (Top Right Key). This will force it to boot only the bootloader without loading the firmware. Once this is done, just reflash the board with the original firmware.
  2. Sometimes USB hubs can act weird, so try connecting the board directly to your computer or plugging/unplugging the USB hub.
  3. If you get an error such as "Resource Unavailable" when attemting to flash on Linux, you may want to compile and run tools/usb_detach.c. See tools/README.md for more info.