Merge pull request #1419 from Wraul/phantom-improvements
Phantom improvements
This commit is contained in:
Jack Humbert
GitHub
commit
91f3a73a28
@ -24,9 +24,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0003
|
||||
#define MANUFACTURER PHANTOM
|
||||
#define PRODUCT PHANTOM RGB MOD
|
||||
#define DESCRIPTION QMK keyboard firmware for PHANTOM TKL
|
||||
#define MANUFACTURER bpiphany
|
||||
#define PRODUCT PHANTOM
|
||||
#define DESCRIPTION QMK keyboard firmware for PHANTOM
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
@ -44,6 +44,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Underlight configuration
|
||||
*/
|
||||
#define RGB_DI_PIN E2
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 20 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
@ -55,19 +68,79 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* Underlight configuration
|
||||
*/
|
||||
#define RGB_DI_PIN E2
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 20 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
@ -87,4 +160,27 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
#endif
|
||||
|
||||
37
keyboards/phantom/keymaps/default/Makefile
Normal file
37
keyboards/phantom/keymaps/default/Makefile
Normal file
@ -0,0 +1,37 @@
|
||||
# Copyright 2013 Jun Wako <wakojun@gmail.com>
|
||||
#
|
||||
# This program is free software: you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
# the Free Software Foundation, either version 2 of the License, or
|
||||
# (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
|
||||
# QMK Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
24
keyboards/phantom/keymaps/default/config.h
Normal file
24
keyboards/phantom/keymaps/default/config.h
Normal file
@ -0,0 +1,24 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
@ -1,7 +1,22 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "phantom.h"
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
// Helpful defines
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
@ -11,92 +26,52 @@
|
||||
#define _FL 1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,-----------------------------------------------------------------------------.
|
||||
* |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus|
|
||||
* |-----------------------------------------------------------| |--------------|
|
||||
* | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp|
|
||||
* |-----------------------------------------------------------| |--------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del| End|PgDn|
|
||||
* |-----------------------------------------------------------| `--------------'
|
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |
|
||||
* |-----------------------------------------------------------| ,----.
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up |
|
||||
* |-----------------------------------------------------------| ,-------------.
|
||||
* |Ctrl|Gui |Alt | Space |ALT |GUI |_FL |CTRL | |Lft| Dn |Rig |
|
||||
* `-----------------------------------------------------------' `-------------'
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
* ,-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------| |--------------|
|
||||
* | | | | | | | | | | | | | | Reset | | | | |
|
||||
* |-----------------------------------------------------------| |--------------|
|
||||
* | | | | | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------| `--------------'
|
||||
* | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------| ,----.
|
||||
* | | F1| F2| F3| F4| F5|F6 |F7 |F8 | | | | | |
|
||||
* |-----------------------------------------------------------| ,-------------.
|
||||
* | | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------' `-------------'
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, \
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
#else
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
#endif
|
||||
[_BL] = KEYMAP(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_BRK, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
|
||||
),
|
||||
[_FL] = KEYMAP(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MSEL, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, KC_CALC, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
SHIFT_ESC,
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(SHIFT_ESC),
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t shift_esc_shift_mask;
|
||||
switch (id) {
|
||||
case SHIFT_ESC:
|
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||
if (record->event.pressed) {
|
||||
if (shift_esc_shift_mask) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
if (shift_esc_shift_mask) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
|
||||
45
keyboards/phantom/keymaps/default/readme.md
Normal file
45
keyboards/phantom/keymaps/default/readme.md
Normal file
@ -0,0 +1,45 @@
|
||||
# Keymap for a standard winkey ANSI configuration of the Phantom
|
||||
|
||||
A basic keymap intended for a Phantom using the standard ANSI layout.
|
||||
|
||||
See [keymap.c](keymap.c) for details.
|
||||
|
||||
## Layers
|
||||
|
||||
The keymap have two layers. To access the functions on the second layer, hold down `Fn` and press the corresponding key.
|
||||
|
||||
### Layer 1: Default Layer
|
||||
,---. ,---------------. ,---------------. ,---------------. ,-----------.
|
||||
|Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
|
||||
`---' `---------------' `---------------' `---------------' `-----------'
|
||||
,-----------------------------------------------------------. ,-----------.
|
||||
|~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU|
|
||||
|-----------------------------------------------------------| |-----------|
|
||||
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD|
|
||||
|-----------------------------------------------------------| '-----------'
|
||||
|Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
|
||||
|-----------------------------------------------------------| ,---.
|
||||
|Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | |Up |
|
||||
|-----------------------------------------------------------| ,-----------.
|
||||
|Ctl|Gui|Alt| Space |Alt|Gui|Fn |Ctl| |Lef|Dow|Rig|
|
||||
`-----------------------------------------------------------' `-----------'
|
||||
|
||||
### Layer 2: Function Layer
|
||||
,---. ,---------------. ,---------------. ,---------------. ,-----------.
|
||||
| | | | | | | | | | | | |Stp|Ply|Prv|Nxt| |Mut|Vo-|Vo+|
|
||||
`---' `---------------' `---------------' `---------------' `-----------'
|
||||
,-----------------------------------------------------------. ,-----------.
|
||||
| | | | | | | | | | | | | | | | | | |
|
||||
|-----------------------------------------------------------| |-----------|
|
||||
| | | | | | | | | | | | | | | | | | |
|
||||
|-----------------------------------------------------------| '-----------'
|
||||
| | | | | | | | | | | | | Media |
|
||||
|-----------------------------------------------------------| ,---.
|
||||
| | | |Cal| | | | | | | | | | |
|
||||
|-----------------------------------------------------------| ,-----------.
|
||||
| | | | | | | | | | | | |
|
||||
`-----------------------------------------------------------' `-----------'
|
||||
|
||||
## Building
|
||||
|
||||
To build the firmware with the default keymap, run `make default`.
|
||||
37
keyboards/phantom/keymaps/rgbmod/Makefile
Normal file
37
keyboards/phantom/keymaps/rgbmod/Makefile
Normal file
@ -0,0 +1,37 @@
|
||||
# Copyright 2013 Jun Wako <wakojun@gmail.com>
|
||||
#
|
||||
# This program is free software: you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
# the Free Software Foundation, either version 2 of the License, or
|
||||
# (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
|
||||
# QMK Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
24
keyboards/phantom/keymaps/rgbmod/config.h
Normal file
24
keyboards/phantom/keymaps/rgbmod/config.h
Normal file
@ -0,0 +1,24 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
77
keyboards/phantom/keymaps/rgbmod/keymap.c
Normal file
77
keyboards/phantom/keymaps/rgbmod/keymap.c
Normal file
@ -0,0 +1,77 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "phantom.h"
|
||||
|
||||
// Helpful defines
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_BL] = KEYMAP(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
|
||||
),
|
||||
[_FL] = KEYMAP(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, \
|
||||
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
),
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
@ -1,43 +0,0 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include "stdint.h"
|
||||
#include "led.h"
|
||||
|
||||
void led_init_ports(void) {
|
||||
// * Set our LED pins as output
|
||||
DDRB |= (1<<6);
|
||||
DDRB |= (1<<7);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTB |= (1<<6);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTB &= ~(1<<6);
|
||||
}
|
||||
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
|
||||
// Turn scrolllock on
|
||||
PORTB |= (1<<7);
|
||||
} else {
|
||||
// Turn scrolllock off
|
||||
PORTB &= ~(1<<7);
|
||||
}
|
||||
}
|
||||
@ -1,9 +1,63 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "phantom.h"
|
||||
#include "led.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
led_init_ports();
|
||||
};
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
led_init_ports();
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_init_ports(void) {
|
||||
DDRB |= (1<<6) | (1<<7); // OUT
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK))
|
||||
{
|
||||
PORTB |= (1<<6); // HI
|
||||
}
|
||||
else
|
||||
{
|
||||
PORTB &= ~(1<<6); // LO
|
||||
}
|
||||
|
||||
if (usb_led & (1<<USB_LED_SCROLL_LOCK))
|
||||
{
|
||||
PORTB |= (1<<7); // HI
|
||||
}
|
||||
else
|
||||
{
|
||||
PORTB &= ~(1<<7); // LO
|
||||
}
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
@ -1,40 +1,105 @@
|
||||
/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifndef PHANTOM_H
|
||||
#define PHANTOM_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
/* Phantom matrix layout
|
||||
* ,-----------------------------------------------------------------------------.
|
||||
* |00 |02| 03| 04| 05| | 06| 07| 08| 09| | 0a|0b |0c |0d | |0e |0f |0g |
|
||||
* |-----------------------------------------------------------| |--------------|
|
||||
* | 01| 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1d | |1e |1f |1g |
|
||||
* |-----------------------------------------------------------| |--------------|
|
||||
* |20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c| 2d| | 2e | 2f | 2g |
|
||||
* |-----------------------------------------------------------| `--------------'
|
||||
* |30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d |
|
||||
* |-----------------------------------------------------------| ,----.
|
||||
* | 40 | 42| 43| 44| 45| 46| 47| 48| 49| 4a| 4b| 4d | | 4f |
|
||||
* |-----------------------------------------------------------| ,-------------.
|
||||
* | 50 | 51 | 52 | 57 |5a | 5b | 5c | 5d | | 5e| 5f | 5g |
|
||||
* `-----------------------------------------------------------' `-------------'
|
||||
*/
|
||||
// The first section contains all of the arguments
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KEYMAP( \
|
||||
k00, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
|
||||
k01, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1d, k1e, k1f, k1g, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
|
||||
k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4d, k4f, \
|
||||
k50, k51, k52, k57, k5a, k5b, k5c, k5d, k5e, k5f, k5g \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1d, k1d, k1e, k1f, k1g}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g}, \
|
||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3d, k3d, k3d, k3d}, \
|
||||
{k40, k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4d, k4d, k4f, k4f, k4f}, \
|
||||
{k50, k51, k52, k57, k57, k57, k57, k57, k57, k57, k5a, k5b, k5c, k5d, k5e, k5f, k5g} \
|
||||
// Keymap utilizing all the possible keys on the PCB.
|
||||
#define KEYMAP_7BIT( \
|
||||
K00, K53, K02, K03, K04, K05, K56, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
|
||||
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3G, \
|
||||
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F, K4G, \
|
||||
K50, K51, K52, K54, K55, K57, K58, K5A, K5B, K5C, K5D, K5E, K5F, K5G \
|
||||
) { \
|
||||
/* 0 1 2 3 4 5 6 7 8 9 A B C D E F G */ \
|
||||
/* 0 */ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \
|
||||
/* 1 */ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \
|
||||
/* 2 */ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \
|
||||
/* 3 */ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3G }, \
|
||||
/* 4 */ { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F, K4G }, \
|
||||
/* 5 */ { K50, K51, K52, K53, K54, K55, K56, K57, K58, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F, K5G } \
|
||||
}
|
||||
|
||||
|
||||
// Keymap for a standard ANSI layout.
|
||||
#define KEYMAP( \
|
||||
K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
|
||||
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D, K1E, K1F, K1G, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
|
||||
K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4D, K4F, \
|
||||
K50, K51, K52, K57, K5A, K5B, K5C, K5D, K5E, K5F, K5G \
|
||||
) KEYMAP_7BIT( \
|
||||
K00, KC_NO, K02, K03, K04, K05, KC_NO, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
|
||||
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, KC_NO, K1D, K1E, K1F, K1G, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, KC_NO, KC_NO, KC_NO, \
|
||||
K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, KC_NO, K4D, KC_NO, K4F, KC_NO, \
|
||||
K50, K51, K52, KC_NO, KC_NO, K57, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F, K5G \
|
||||
)
|
||||
|
||||
#define KEYMAP_WINKEYLESS( \
|
||||
K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
|
||||
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D, K1E, K1F, K1G, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
|
||||
K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4D, K4F, \
|
||||
K50, K51, K52, K57, K5B, K5C, K5D, K5E, K5F, K5G \
|
||||
) KEYMAP_7BIT( \
|
||||
K00, KC_NO, K02, K03, K04, K05, KC_NO, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
|
||||
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, KC_NO, K1D, K1E, K1F, K1G, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, KC_NO, KC_NO, KC_NO, \
|
||||
K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, KC_NO, K4D, KC_NO, K4F, KC_NO, \
|
||||
K50, K51, K52, KC_NO, KC_NO, K57, KC_NO, KC_NO, K5B, K5C, K5D, K5E, K5F, K5G \
|
||||
)
|
||||
|
||||
#define KEYMAP_ISO( \
|
||||
K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
|
||||
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D, K1E, K1F, K1G, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, K2F, K2G, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
|
||||
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4D, K4F, \
|
||||
K50, K51, K52, K57, K5A, K5B, K5C, K5D, K5E, K5F, K5G \
|
||||
) KEYMAP_7BIT( \
|
||||
K00, KC_NO, K02, K03, K04, K05, KC_NO, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
|
||||
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, KC_NO, K1D, K1E, K1F, K1G, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E, K2F, K2G, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, KC_NO, KC_NO, \
|
||||
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, KC_NO, K4D, KC_NO, K4F, KC_NO, \
|
||||
K50, K51, K52, KC_NO, KC_NO, K57, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F, K5G \
|
||||
)
|
||||
|
||||
#define KEYMAP_ISO_WINKEYLESS( \
|
||||
K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
|
||||
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1D, K1E, K1F, K1G, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, K2F, K2G, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
|
||||
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4D, K4F, \
|
||||
K50, K51, K52, K57, K5B, K5C, K5D, K5E, K5F, K5G \
|
||||
) KEYMAP_7BIT( \
|
||||
K00, KC_NO, K02, K03, K04, K05, KC_NO, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
|
||||
K01, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, KC_NO, K1D, K1E, K1F, K1G, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E, K2F, K2G, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, KC_NO, KC_NO, \
|
||||
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, KC_NO, K4D, KC_NO, K4F, KC_NO, \
|
||||
K50, K51, K52, KC_NO, KC_NO, K57, KC_NO, KC_NO, K5B, K5C, K5D, K5E, K5F, K5G \
|
||||
)
|
||||
|
||||
#endif
|
||||
|
||||
@ -1 +0,0 @@
|
||||
For WS2812B LED strip support, connect DIN from strip to PE2 on Teensy (see reference image https://i.imgur.com/aDfNoHT.jpg)
|
||||
@ -1,4 +1,48 @@
|
||||
Phantom keyboard firmware
|
||||
======================
|
||||
=========================
|
||||
|
||||
TODO: to be updated.
|
||||
A community-developed keyboard PCB designed to fit inside the case of a Filco Majestouch.
|
||||
|
||||
See the [Deskthority wiki](https://deskthority.net/wiki/Phantom) for more information.
|
||||
|
||||
## Bootloader
|
||||
|
||||
The Phantom uses a [Teensy 2.0](https://www.pjrc.com/store/teensy.html) as a controller.
|
||||
|
||||
The Teensy has a special bootloader that can be accessed by pressing the button on the Teensy PCB. It is also possible to use Boot Magic and Command to access the bootloader.
|
||||
|
||||
To write the firmware to the Teensy use [Teensy loader](https://www.pjrc.com/teensy/loader.html).
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see the [documentation](https://docs.qmk.fm).
|
||||
|
||||
## RGB underlight
|
||||
|
||||
It is possible to connect a WS2812B LED strip to the Teensy for RGB underlight support.
|
||||
|
||||
For this to work the DIN connection on the WS2812B strip should be soldered to PE2 on the Teensy (see reference image https://i.imgur.com/aDfNoHT.jpg).
|
||||
|
||||
See [rgbmod](keymaps/rgbmod) for a keymap that utilizes the RGB underlight feature.
|
||||
|
||||
## Building
|
||||
|
||||
The Phantom allows for a huge amount of different layouts.
|
||||
|
||||
Depending on which layout and keymap you would like to use, you will have to compile the firmware slightly differently. All of the commands should be run in the [keyboards/phantom](/keyboards/phantom) folder.
|
||||
|
||||
### Custom keymaps
|
||||
|
||||
To define your own keymap, copy one of the [existing keymap](keymaps) folders and give it the name of your keymap. Then check the [keymap documentation](https://docs.qmk.fm/Keymap.html) for details on how to modify the keymap.
|
||||
|
||||
To make it easy to define keymaps for the most common layouts a few macros are provided.
|
||||
|
||||
| Layout | Macro |
|
||||
| --------------- | ------------------------- |
|
||||
| Winkey ANSI | `KEYMAP()` |
|
||||
| Winkeyless ANSI | `KEYMAP_WINKEYLESS()` |
|
||||
| Winkey ISO | `KEYMAP_ISO()` |
|
||||
| Winkeyless ISO | `KEYMAP_ISO_WINKEYLESS()` |
|
||||
| 7BIT | `KEYMAP_7BIT()` |
|
||||
|
||||
To build the firmware with a custom keymap, run `make <keymap name>`
|
||||
|
||||
@ -1,7 +1,3 @@
|
||||
|
||||
|
||||
SRC = led.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
@ -53,17 +49,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?=yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches
|
||||
|
||||
Loading…
Reference in New Issue
Block a user