jlj-qmk/keyboards/mxss/readme.md

# MxSS - Polycarb 65% Kit for MX/SMK

![MxSS - Polycarb 65% Kit for MX/SMK](https://i.imgur.com/WDTWcmU.jpg)

### Information:

 - Case: Frosted Polycarbonate, CNC milled
 - Plate: Brass, mirror-finished and electroplated
 - Weight: Same as plate
 - PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish

### Details:

 - 2.9 degrees angle on the case
 - Top mount plate
 - Center USB, Type-B Mini
 - MX and SMK (White and Orange) switch support
 - Holtite support
 - RGB underglow
 - 1.5kg with plate and weight

Keyboard Maintainer: [MxBlue](https://github.com/mxblu)  

Hardware Supported: Custom PCB, ATMega32u4

Hardware Availability: https://geekhack.org/index.php?topic=94986.0

Make example for this keyboard (after setting up your build environment):

    make mxss:default

See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

# Front LED Operation

The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes.

There are 3 modes of operation:

 - FLED_OFF - Front LEDs stay off
 - FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request)
 - FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer
 
Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example).

## Custom Keycodes

 - FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI)
 - FLED_VAI - Increase front LED brightness
 - FLED_VAD - Decrease front LED brightness
 
 # Further Notes
 
 As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example.
Add MxSS keyboard (#3335) * Added basic MxSS support * Fixed split RSHFT for ISO layouts * Updated readme.md for MxSS * Added initial support for individual control of front RGB LEDs * Changed RGBLED color selection to work using hue and saturation rather than RGB Added code for LED state change on layer change * Avoid needing an entire 8 bits to store the brightness value * Added custom keycodes, along with their handlers * Added EEPROM storage for front LED config * Fixed up ability to use QMK Configurator and updated readme.md * Applied suggested changes from pull request: https://github.com/standard/standard/issues/452 Updated name in license descriptions Updated layouts to snake case Corrected mistakes in info.json Updated layer_colors to a weak attributed array in mxss.c * Defined a new safe range for custom keycodes in keymap.c 6 years ago			`# MxSS - Polycarb 65% Kit for MX/SMK`

			`![MxSS - Polycarb 65% Kit for MX/SMK](https://i.imgur.com/WDTWcmU.jpg)`

			`### Information:`

			`- Case: Frosted Polycarbonate, CNC milled`
			`- Plate: Brass, mirror-finished and electroplated`
			`- Weight: Same as plate`
			`- PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish`

			`### Details:`

			`- 2.9 degrees angle on the case`
			`- Top mount plate`
			`- Center USB, Type-B Mini`
			`- MX and SMK (White and Orange) switch support`
			`- Holtite support`
			`- RGB underglow`
			`- 1.5kg with plate and weight`

			`Keyboard Maintainer: [MxBlue](https://github.com/mxblu)`

			`Hardware Supported: Custom PCB, ATMega32u4`

			`Hardware Availability: https://geekhack.org/index.php?topic=94986.0`

			`Make example for this keyboard (after setting up your build environment):`

			`make mxss:default`

Modified URLs to point to new locations 5 years ago			`See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.`
Add MxSS keyboard (#3335) * Added basic MxSS support * Fixed split RSHFT for ISO layouts * Updated readme.md for MxSS * Added initial support for individual control of front RGB LEDs * Changed RGBLED color selection to work using hue and saturation rather than RGB Added code for LED state change on layer change * Avoid needing an entire 8 bits to store the brightness value * Added custom keycodes, along with their handlers * Added EEPROM storage for front LED config * Fixed up ability to use QMK Configurator and updated readme.md * Applied suggested changes from pull request: https://github.com/standard/standard/issues/452 Updated name in license descriptions Updated layouts to snake case Corrected mistakes in info.json Updated layer_colors to a weak attributed array in mxss.c * Defined a new safe range for custom keycodes in keymap.c 6 years ago
			`# Front LED Operation`

			`The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes.`

			`There are 3 modes of operation:`

			`- FLED_OFF - Front LEDs stay off`
			`- FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request)`
			`- FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer`

			`Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example).`

			`## Custom Keycodes`

			`- FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI)`
			`- FLED_VAI - Increase front LED brightness`
			`- FLED_VAD - Decrease front LED brightness`

			`# Further Notes`

			`As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example.`